Výparník RCBR4631010ED

General features : RCBR4631010
RCBR Ø 630 range unit coolers have been designed to be installed inside cold rooms suited for fresh
and frozen goods storage
The ED version is supplied with mounted defrosting heaters and is suitable for being used at low
temperature applications
The fan motors operate in the suction mode and prevent the condensate forming on the fan
The coil is made of aluminium fins, 12mm rifled copper tube and a geometry of 48 x 41,57
RCBR unit coolers can be classified in two groups according to the needed cold room temperature (Tc):
6mm fin spacing for a Tc from -20°C to +10°C; 10mm fin spacing for a Tc from -35°C to +4°C. Each fin
spacing group is also available with 4, 6, 8, and 10 rows
The coils are tested with nitrogen at a pressure of 25 bar.
The fan motor models in use have the following features:
Double speed (1010-1320 rpm)
Manufactured following EN 60335-1 laws, with internal thermal protection
Fan diameter 630mm, external rotor
Power supply 400V/3/50Hz with two different wiring options: DELTA (1320 rpm) and STAR (1010 rpm)
IP54 protection rate
F insulation class
Operating temperature from -40°C to +40°C
Not wired
Electrics made in conformity with 2006/95/CE Low Tension directive
The housing is made of aluminium
The manufacturing solutions used give the housing strength and guarantee the absence of vibrations
during the functioning.
Screws, washers and nuts are made of stainless steel

Product file : Unit coolers
Code RCBR4631010ED
Model Ceiling cubic unit cooler
Range RCBR
Application LBP
Net weight 684,4 kg
Inlet connection 2x35x1,5 mm
Outlet connection 2x54x2 mm
Drain connection 2" Gas
Ped 1
Rows 10
Fin spacing 10
Circuit volume 113 dm³
Total surface 436,92 m²
Fan motor
Type AC
Fans no. 4
Diameter 630 mm
Power supply 400/3/50
Defrost 63800 W
Low speed
Speed 1070 rpm
Power consumption 7000 W
Current consumption 12 A
Air flow 52576 m³/h
Air throw 57 m
High speed
Speed 1330 rpm
Power consumption 10800 W
Current consumption 20 A
Air flow 69695 m³/h
Air throw 63 m